How to create good Feng Shui for the factory to bring good luck and wealth

Introduction: The quality of a factory's feng shui will directly affect the company's production and profitability. The importance of factory feng shui is self-evident. The ultimate goal of opening a factory is to make money, so what kind of factory feng shui can bring good luck and wealth to the company? Let’s take a look at it together below! Mr. Shui Mo’s Feng Shui special topic contains more articles about Feng Shui, allowing you to understand Feng Shui knowledge more quickly.

1. Determine the location and orientation of the main door

Place a compass in the center of the base inside the wall to see in which direction of the base the gate is located. After the direction is determined, consider the orientation of the door. Outside the front door, you should avoid electric poles, roof corners, temple ridges, curved roads, chimneys and other shapes. The orientation of the front door is determined by the incoming water (including pond water, inlet, and crossroads) - the qi outlet, which is required to make the qi of the hexagram pure and unmixed. The direction of the door should be based on the Yuan and the order, which is called "the first star in the direction is the handle of disaster and fortune". The direction of the door should be based on the local conditions and should not be fixed. In addition, we should also pay attention to:

1. The incoming water and air are in accordance with the application of [City Gate Formula]. For example, if water comes in from the last direction in the seventh period, you can set up the Renshan Bingxiang. The last water is connected to the star seven, which is the commanding star, and nine upwards is the vital energy. This is in accordance with the application of [City Gate Formula].

2. The dragon god in front and the dragon god in the back. As in the previous example, place the compass in the middle of the gate to measure the incoming water (or intersection, pond, whatever is visible to the naked eye), and look at its center point. If it is the water coming from both the end and Kun, and it is the dragon god in front, then the gate should be facing the Renshan Bingxiang and Ziwu. If the end is accompanied by Ding, then the dragon god will come later, and the main door should face Renshan, Bingxiang and Haiyi.

2. Decide on the office and factory

After the orientation of the gate is determined, place the compass in the center of the base based on this orientation, and arrange the take-off star map according to the birth, prosperity, decline, and death of the mountain and direction (water) plates.

1. Build offices, factories, employee residences, artificial mountains, etc. in the prosperous direction of the mountain.

2. When water is prosperous, you can build a pool, leave passages, doors and open spaces. In addition, drainage ditches should also be arranged here.

The office is the decision-making and control center and the main body of the factory. The building should be taller than other buildings, and the factory gate should be located in its prosperous direction. (Use the office's flying star, look at the direction plate, and measure by placing the plate in the center of the office) The chairman's office, manager's office, staff offices, conference rooms, exhibition rooms, computer rooms, safes, etc. inside should be arranged in the prosperous or auxiliary directions of the mountain plate. Passageways (traffic lines), large windows, side doors, back doors, air-conditioning vents, fish tanks, stairs, elevators, etc. should be placed in the prosperous or auxiliary directions of the direction plate.

The view of the factory is the same as that of the office. It also uses the orientation of each factory building and the Yuanyun to launch the flying star. The heavy and solid parts, such as the tool room, main machines, motor room, studio, etc. are placed in the prosperous and auxiliary direction of the mountain plate star in the factory. Place the moving virtual part in the prosperous or auxiliary direction of the direction plate.

Factory Feng Shui Classification

Factory Feng Shui includes two categories:
One is to rent a factory, and the other is to build a factory by yourself.

When renting a factory building, in addition to considering the factory's geographical location and Feng Shui environment, one must also consider the Feng Shui layout of the entire park and the location of the rented factory building in the park. Now most factory buildings in industrial parks are built on the same mountain and in the same direction. Some factories did not hire Feng Shui masters to survey the area when the park was built, resulting in a situation of decline. The factories that move in have difficulty in development or go bankrupt, and are finally rented to others as temporary warehouses. Therefore, before renting and moving in, you need to know the layout of the park and factory as well as the rise and fall of fortune.

Geographical location and environment of factory site selection

Factors to consider when choosing a factory address include the following:

1. The factory site is selected in the urban area: This type of factory is suitable for high-tech industries that are technology- and capital-intensive, require a small area of ​​land, and are free of noise, air, and water pollution. The advantages are: very convenient transportation, well-informed, easy to attract talents, low transportation costs, etc. The disadvantages are: high land and labor costs, many restrictions, and easy relocation due to urban planning and other reasons.

2. The factory site is selected in the suburbs: This type of factory site is the most applicable and has all the advantages of a factory site in a downtown area. It is also suitable for labor-intensive enterprises, and the land and labor costs are relatively low. There are relatively few restrictions, making it an ideal factory site.

3. The factory site is chosen in the countryside: There are many situations for this type of factory site, including being close to the city, dock, railway station, and having good or bad roads, water supply, and electricity supply, which should be analyzed separately. Such factories are suitable for labor-intensive and polluting industries. The advantages are: low land cost, low labor cost, close to raw material production, low requirements for worker quality, and easy to recruit workers. There are also many disadvantages: high sales and transportation costs, small amount of information, inadequate traffic conditions, frequent water and power outages, etc.

How to choose a factory site

When choosing a factory location, the first considerations are affordable rent and convenient transportation, but don’t forget that the key factory feng shui pattern will determine the prosperity of your production and sales. Without a reasonable factory feng shui layout, it is difficult to maintain long-term prosperity. The Feng Shui of factory decoration must be combined with the numerology of the main shareholders to determine the overall Feng Shui pattern. The main focus should be on surveying the Feng Shui lines and patterns of the main gate, front desk, general manager's office, finance office and marketing department to ensure smooth factory operations. Only if the main details of factory operations are well grasped can management be smooth. However, even if management is smooth, research and development, production and sales may still be difficult to achieve as expected. At this time, it is recommended to adjust the factory Feng Shui. Master Fuyin has been professionally surveying Feng Shui for more than 30 years. His precision factory site selection survey, decoration Feng Shui and office Feng Shui layout and furnishing guidance will help you broaden your horizons and grasp the "geographical advantage" to develop and expand your business!

Feng Shui planning and layout of industrial plants

There are two types of factory feng shui: one is renting a factory, and the other is building a factory yourself. When renting a factory building, in addition to considering the factory's geographical location and Feng Shui environment, one must also consider the Feng Shui layout of the entire park and the location of the rented factory building in the park. Now most factory buildings in industrial parks are built on the same mountain and in the same direction. Some factories did not hire Feng Shui masters to survey the area when the park was built, resulting in a situation of decline. The factories that move in have difficulty in development or go bankrupt, and are finally rented to others as temporary warehouses. Therefore, before renting and moving in, you need to know the layout of the park and factory as well as the rise and fall of fortune.

Geographical location and environment of factory site selection

Factors that should be considered for factory address mainly include the following aspects.

1. The factory is located in the urban area: This type of factory is suitable for high-tech industries that are technology- and capital-intensive, require a small area of ​​land, and are free of noise, air, and water pollution. The advantages are: very convenient transportation, well-informed, easy to attract talents, low transportation costs, etc. The disadvantages are: high land and labor costs, many restrictions, and easy relocation due to urban planning and other reasons.

2. The factory is located in the suburbs: This type of site is the most applicable and has all the advantages of a downtown site. It is also suitable for labor-intensive enterprises, with lower land and labor costs and relatively fewer restrictions. It is an ideal factory site.

3. The factory site is chosen in the countryside: There are many situations for this type of factory site, including being close to the city, docks, railway stations, and having good or bad roads, water supply, and electricity supply, which should be analyzed separately. Such factories are suitable for labor-intensive and polluting industries. The advantages are: low land cost, low labor cost, close to raw material production, low requirements for worker quality, and easy to recruit workers. There are also many disadvantages: high sales and transportation costs, small amount of information, inadequate traffic conditions, frequent water and power outages, etc.

The advantages and disadvantages analyzed above are in terms of geographical location. It does not mean that a location with more disadvantages is not suitable for factory location. This should be determined based on the nature of the factory. For example, locating a factory in the city center has many advantages, but if your factory is a labor-intensive enterprise, it is not suitable and it would be more appropriate to locate it outside the city or in the countryside. Consider factors such as raw materials, labor supply, marketing, land costs, and the investment environment. Whether the supply of raw materials is guaranteed, the freight rates, whether it is possible to recruit skilled workers or heavy manual laborers needed for production, whether market sales are profitable, etc. are all factors that should be considered in factory site selection. At the same time, whether you can buy or rent suitable land and factory buildings in a place suitable for your factory, and whether the land and housing prices are reasonable are important conditions that must be considered in site selection. Another very important premise is the investment environment (including hard and soft environment) of the factory location. The hard environment mainly refers to whether transportation is convenient, whether electricity demand is guaranteed, and whether water supply, water source, and sewage discharge can meet the requirements. The soft environment mainly refers to whether the government attaches importance to it and whether it provides a relaxed environment. Such as whether there are any tax incentives, whether administrative fees have been canceled or reduced, whether there are any random charges and levies, the efficiency of government agencies, whether there are any bad habits of "eating, taking, blocking, and asking" in government offices, and of course whether the local people are strong and the security situation is good or bad.
Summary: If you plan to open your own factory, you might as well read the above article to learn more about it. I hope this article can help you build your dream factory more smoothly!

After reading this article, there are more exciting contents in the Feng Shui special topic, let’s take a look!