Detailed explanation of common Feng Shui problems in factories and specific solutions

Introduction: We often ask ourselves, why can’t we succeed in achieving our goals even though we have tried so hard? It’s like someone runs a factory and works diligently but the results are not obvious. Why is that? It is possible that there are some feng shui problems in your factory that need to be resolved in time. Let’s take a look at the specific content below! If you want to know more about Feng Shui, Mr. Shui Mo has prepared a special topic on Feng Shui for you to give you a more comprehensive understanding.

How to solve the Feng Shui problems in factories

In addition to considering the general spatial environment, factories and enterprises should pay special attention to placing frequently used machines in appropriate locations. If they are placed properly, everything will go smoothly, the enterprise will be full of energy and wealth. If they are placed improperly, for example, if they are placed in the position of Five Yellows, the enterprise will suffer constant illness, if they are placed in the position of Cross Swords, fights and brawls will occur, and if they are placed in the position of Fighting Bulls, the enterprise will suffer anger and tension.

Factories are usually placed in open areas in the suburbs and should not be located in busy areas of urban areas. Factories are different from shopping malls. Shopping malls require concentrated personnel and high personnel flow, while factories require safe production and safe discharge of pollutants. If the machines in the factory are placed in a lucky position, wealth and people will prosper, and the factory will make a fortune. Therefore, the spatial environment of the factory is not only a matter of site selection but also a matter of machine placement. The site selection of the factory can refer to the site selection of the residence, and the placement of the machines can be guided by a professional space decoration planner.

A company's signboard cannot determine or influence a person's destiny, nor will it affect the fortune of future generations, but it can affect the company's aesthetics and the harmony of the environment, thereby affecting the mentality of the operator.

From the signboard hung by a company, we can observe the company's fortune and cultural cultivation. We can also tell from the signboard the character of the legal person of the company, whether he is in good health and whether his family is harmonious. One of the more important points is to judge good or bad luck based on the height, color and size of the signboard. For business operators, a good spatial environment alone may not necessarily fundamentally change the way of doing business. A reasonable structural layout is the best way to attract wealth and ward off evil. At the same time, the color matching must be coordinated with the types of business and should be bright so that people can see it at a glance and it is pleasing to the eye. The colors of the signboard should be coordinated so that people feel friendly and pleasant. The signboard should be both artistic and have the function of increasing wealth.

How to find the wealth position in the factory

In spatial environmental science, the direction where wind is stored and energy is gathered is the energy gathering position, which is also the wealth position. There cannot be windows at the wealth position. If there are windows, the wealth position will not gather energy because of the frequent opening and closing of the windows. The energy will be easily dispersed by the wind, resulting in the failure to gather wealth. The wealth position should be bright rather than dark. Brightness indicates vitality, so lights can be set on the wealth position.

The wealth position should be lively, and lively means full of vitality. You can put some evergreen plants here, preferably trees with large, thick leaves and no thorns. Feng Shui master Liu Yarong reminds you that these plants should be planted in soil and do not need to be watered frequently. It is not good to cultivate plants with water.

The wealth position is suitable for sitting. The wealth position is a place where wind is stored and energy is gathered. It is best for enterprises and institutions to set up the finance office here. You can put a sofa at the wealth position at home or in the office, so you can get some wealth there when talking with people. The bosses of enterprises and institutions can put their desks on the wealth. Working at the wealth position can make the company's money roll in and the career prosperous.

You can also place the bed on the wealth position at home. Sleeping on the wealth position every night is conducive to making money. Never place huge items such as the company's filing cabinets and safes on the wealth position. The wealth position should be lively and not oppressive. The wealth position should be auspicious. The wealth position is where winds are stored and energy is gathered. If you place auspicious items there, it will add to your luck. The wealth position can also be used to enshrine Bodhisattvas, the God of Wealth, etc., which will bring even more luck to your enterprise.

The most commonly used auspicious items in factories

1. Gourd: It has the magical effect of curing diseases and disasters, strengthening the body, and benefiting doctors and fortune tellers. There are two types of gourds: wooden gourds and copper gourds. Wooden gourds are mainly used for people with long-term illnesses in the house. You may hang three wooden gourds or place three at the head of the bed. Both men and women can choose it. It should be used especially if there are patients, children or elderly people at home. This item can also ward off evil and prevent disasters and has a wide range of uses.

2. Bagua flat mirror: Its nature is to block the undesirable architectural shapes outdoors. It is best to place it outside the house and avoid placing it indoors to shine on people, because this item can only face outward and can resolve any form of evil. However, don't hang too many of them. Only one can be hung in one direction and no more than three in the whole house, otherwise it will cause self-injury and bring disaster instead of luck.

3. Bagua convex mirror: This magic tool is different from the plain mirror. If you find a tool to ward off evil facing your house outside the window or opposite, you can place this magic tool to reflect the tool and send it back home to avoid being affected by the other party. This mirror should also be placed outdoors, but not pointed at people or placed in front of the door, otherwise it will bring bad luck instead of good luck. Of course, the above are just general rules. There are some details that cannot be expressed in words and must be solved by a skilled Feng Shui master on site.

How to modify the missing corner of the factory

The most ideal shape of a factory building is a rectangle from east to west. However, today's factory buildings are always inevitably protruding on one side and concave on the other side. The concave part, that is, the missing corner, often creates a bad appearance. The so-called "missing corner" refers to the concave part that is missing less than two-thirds of one side of the building. The bigger the concave part, the worse your luck. The missing corners of a house are mostly caused by the consideration of the building's appearance. In this case, the repair method can be determined based on the location of the missing corner.

1. Missing corners in northeast and southwest:
Remove the wall and add the extension to make it square corner. The added part can be used as a warehouse.

2. The missing corner in the east:
It would be best to cover the roof and build additional rooms. However, the east direction is usually used for lighting, so it is difficult to achieve this.

3. Missing corner in the southeast:
The processing method is the same as that for the east direction.

4. The missing corner in the west:
It is best to build an addition to fill in the missing corners and then level it out. This is the best way.

5. The missing corner in the northwest:
This direction has been called the Qian position, the Tian position, the Fu position, etc. since ancient times. Building another house there or making the original house protrude can show great auspicious effects. This position prefers to be protruding, it would be bad if there is a missing corner!

How to change the protrusion of the factory building

In contrast to "missing corners", "protrusions" will generally bring positive effects in terms of fortune. The so-called "protrusion" refers to the phenomenon that within one-third of the length of one side of a building protrudes outward. If there are standard protrusions in the southeast and northwest, your fortune will turn for the better because it is a very auspicious environment.

However, if it appears in the ghost gate directions of northeast and southwest, it will become a bad omen. If you mistakenly think that protrusions are all beneficial, and easily make the house protrude in this direction, not only will it have no effect, but it will make your fortune decline day by day. The protrusion of the Ghost Gate may temporarily improve your luck, but it will soon turn your fortune into decline.

The so-called protrusion of the factory building not only refers to the protrusion of the building itself, but also includes the warehouse within two or three meters from the building. The best way is:
1. Remove the protruding parts.

2. In order to eliminate the protruding phenomenon, it is advisable to build more.
If it is a northeast bulge, then add buildings from east to southeast. If the southwest direction is protruding, you can build buildings from the north to the northwest. By using these two methods, you can turn it into a lucky sign. However, once it is built, it is often not put to use. If reconstruction is not possible, then the only option is to plant evergreen trees on the outside of the protruding Ghost Gate. However, this method can only slightly alleviate the disaster.

How to modify a factory building with a large top and small bottom

In order to save space, many companies build factory buildings with upper floors larger than the lower floors. Judging from the appearance of this type of building, which is larger at the top and smaller at the bottom, it always gives people a feeling of tilt and imbalance. To use the human body as an analogy, it's like having no strength below the waist, being top-heavy, and always looking unnatural. In terms of factory and mine environmental science, a factory building that is larger on top and smaller on the bottom is equivalent to having three-dimensional defects. The recessed part downstairs will gather foul air and is also prone to harboring negative energy.

Feng Shui affects many things in our factory, but if the Feng Shui of the factory is good it can help us get great benefits. Placing some auspicious items and changing some designs can change the Feng Shui. It is not uncommon for accidents to happen one after another in the factory.
Summary: The above article is a detailed analysis of common problems and solutions for factory Feng Shui. You can refer to it and hope it can help you!

After reading this article, there are more exciting contents in the Feng Shui special topic, let’s take a look!